Snmp View Table Settings - D-Link DGS-3700-12 User Manual

To enable or disable the linkchange traps State, use the pull-down menu and then click Apply.

SNMP View Table Settings

This window is used to assign views to community strings that define which MIB objects can be accessed by a remote
SNMP manager.
To view this window, click Management > SNMP Settings > SNMP View Table Settings, as shown below:
The following parameters can be set:
Parameter
View Name
Subtree OID
View Type
To implement the new settings, click Apply. To delete an entry click the corresponding Delete button.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 3- 28 SNMP Linkchange Traps Settings window
Figure 3- 29 SNMP View Table Settings window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB
tree) that will be included or excluded from access by an SNMP manager.
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
53