DHCP Server Exclude Address Settings
The DHCP server assumes that all IP addresses in a DHCP pool subnet are available for assigning to DHCP clients.
You must use this page to specify the IP address that the DHCP server should not assign to clients. This command
can be used multiple times in order to define multiple groups of excluded addresses.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Exclude Address
Settings, as shown below:
The fields that can be configured are described below:
Parameter
Begin Address
End Address
Click Apply to implement changes made.
DHCP Server Pool Settings
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Pool Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Pool Name
Click Add to create the new DHCP pool. By clicking the Edit button, the user can edit the DHCP Server Pool Settings.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 9- 8 DHCP Server Exclude Address Settings window
Description
Enter the starting IP Address.
Enter the ending IP Address.
Figure 9- 9 DHCP Server Pool Settings window
Description
Enter the DHCP Server Pool name.
257