Vlan Counter Settings - D-Link DGS-3700-12 User Manual

The following parameters can be configured:
Parameter
From Port/To Port
VLAN Precedence
Click Apply to implement changes made.

VLAN Counter Settings

The VLAN Counter Settings table is used to create the control entry for VLAN traffic flow statistsics. The user can
create control entries to count statistics for specific VLANs, or to count statistics for specific ports on specific VLANs.
The statistics can be either byte count or packet count and can be counted for different frame types.
To view this window, click L2 Features > VLAN > VLAN Counter Settings, as shown below:
The following parameters may be configured:
Parameter Description
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 17 VLAN Precedence Settings window
Description
Specify the port or range of ports you wish to configure.
Use the drop-down menu to select the VLAN precedence, choose either MAC Based VLAN or
Subnet VLAN.
MAC Based VLAN – Specifies that the MAC-based VLAN classification is given precedence
over the subnet VLAN classification.
Subnet VLAN – Specifies that the subnet VLAN classification is given precedence over the
MAC-based VLAN classification.
Figure 4- 18 VLAN Counter Settings window
78