D-Link DGS-3700-12 User Manual page 175

Dgs-3700 series layer 2 managed gigabit ethernet switch release 2.00
Hide thumbs Also See for DGS-3700-12:
Table of Contents

Advertisement

To configure the IPv6 ACL, select IPv6 in the Add ACL Profile window, enter the Profile ID and Profile Name into the
top half of the screen and then click Select. The following window will appear:
Click on the boxes at the top of the table, which will then turn red and reveal parameters for configuration. To create a
new entry, enter the correct information and click Create. To return to the Access Profile List window, click <<Back.
The following parameters can be set for IPv6:
Parameter
IPv6 Class
IPv6 Flow Label
IPv6 TCP
IPv6 UDP
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 7- 16 Access Rule Detail Information window (IPv4)
Figure 7- 17 Add ACL Profile window (IPv6)
Description
Ticking this check box will instruct the Switch to examine the class field of the IPv6 header.
This class field is a part of the packet header that is similar to the Type of Service (ToS) or
Precedence bits field in IPv4.
Ticking this check box will instruct the Switch to examine the flow label field of the IPv6
header. This flow label field is used by a source to label sequences of packets such as non-
default quality of service or real time service packets.
Ticking this check box will specify that the rule applies to TCP traffic.
The user can enter a specific TCP Source Port Mask or TCP Destination Port Mask.
Ticking this check box will specify that the rule applies to UDP traffic.
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-3700-12g

Table of Contents