System Information Settings - D-Link DGS-3700-12 User Manual

System Information Settings

This window contains the System Information details. The user may enter a System Name, System Location and
System Contact to aid in defining the Switch, to the user's preference. This window displays the MAC Address,
Firmware Version and Hardware Version.
To view this window, click System Configuration > System Information Settings, as shown below:
The fields that can be configured are described below:
Parameter
System Name
System Location
System Contact
Click Apply to implement changes made.
Dual Configuration Settings
The following window is used to configure firmware information set in the Switch. The DGS-3700 Series has the
capability to store two firmware images in its memory.
To access this window, click System Configuration > Dual Configuration Settings, as shown below:
This window displays the following information:
Parameter Description
ID States the ID number of the configuration file located in the Switch's memory. The Switch can
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 2- 2 System Information Settings window
Description
Enter a system name for the Switch, if so desired. This name will identify it in the Switch
network.
Enter the location of the Switch, if so desired.
Enter a contact name for the Switch, if so desired.
Figure 2- 3 Dual Configuration Settings window
16