Arp Table - D-Link DGS-3700-12 User Manual

MAC Address
After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To
completely clear the Static ARP Settings, click the Delete All button.

ARP Table

This window displays current ARP entries on the Switch. To search a specific ARP entry, enter an Interface Name or
an IP Address at the top of the window and click Find. Click the Show Static button to display static ARP table
entries. To clear the ARP Table, click Clear All.
To view this window, click Manamgement > ARP > ARP Table, as shown below:
IPv6 Neighbor Settings
This window allows the user to create and configure IPv6 Neighbor settings on the Switch. The Switch's current IPv6
neighbor settings will be displayed in the table at the bottom of this window.
To view this window, click Management > IPv6 Neighbor Settings as shown below:
The following parameters can be configured:
Parameter Description
Interface Name Enter the interface name of the IPv6 neighbor you wish to configure.
Neighbor IPv6 Enter the neighbor IPv6 address of the entry you wish to configure.
Address
Link Layer MAC Enter the MAC address of the neighbor device to be added as an IPv6 neighbor on the IP
Address interface.
Interface Name In order to search for a previously configured Interface name enter the appropriate information
and click Find. To remove a previously configured Interface enter the Interface name and click
Clear.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
The MAC address of the ARP entry.
NOTE: The Switch supports up to 255 static ARP entries.
Figure 3- 2 Browse ARP Table window
Figure 3- 3 IPv6 Neighbor Settings window
34