LLDP Management Address List
This window is used to find the LLDP management address information on the Switch.
To view this window, click L2 Features > LLDP > LLDP > LLDP Management Address List, as shown below:
The following parameters can be set:
Parameter
Description
Address
Use the drop-down menu to select either the IPv4 or IPv6 Address. Enter the management IP
address or the IP address of the entities you wish to search for. IPv4/IPv6 is a management IP
so the IP information will be sent with the frame when the management address configuration is
enabled.
Click Find to begin the search.
LLDP Basic TLVs Settings
This window is used to enable the settings for the Basic TLVs Settings. An active LLDP port on the Switch always
includes mandatory data in its outbound advertisements. There are four optional data types that can be configured for
an individual port or group of ports to exclude one or more of these data types from outbound LLDP advertisements.
The mandatory data type includes four basic types of information (end of LLDPDU TLV, chassis ID TLV, port ID TLV,
and Time to Live TLV). The mandatory data types cannot be disabled. There are also four data types which can be
optionally selected. These include Port Description, System Name, System Description and System Capability.
To view this window, click L2 Features > LLDP > LLDP > LLDP Basic TLVs Settings, as shown below:
The following parameters can be set:
Parameter
Description
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 89 LLDP Management Address List window
Figure 4- 90 LLDP Basic TLVs Settings window
133