Historical Counter & Utilization - D-Link DGS-3700-12 User Manual

VLAN Name Specifies the VLAN Name.
VID (1-4094) Specifies the VLAN ID.
Port List Specifies the ports that are attached to the VLAN.
Enter the appropriate information and click Find, the informationwill be displayed in the VLAN Counter Statistics
Table. To remove an entry enter the appropriate information and click Clear, to remove all entries click Clear All.
Historical Counter & Utilization
This folder contains two windows to view statistics about packets sent and received by the Switch and Historical
Utilization of the CPU and memory.
Historical Counter
This window is used to display statistics about the packets sent and received by the Switch. The counters are set up in
15-minute and one-day intervals. There is a maximum of five 15-minute historical statistic entries supported for each
port, with one being the most recent 15 minutes of data. The Switch also displays statistics based on a per day basis,
with a maximum of two historical statistic entries supported.
To view this window, click Monitoring > Statistics > Historical Counter & Utilization > Historical Counter, as
shown below:
The following parameters may be configured:
Parameter Description
Port Specifies the port you wish to view.
Packet/Error Specifies information regarding Valid packets or Error packets.
15 Minutes/1 Day Choose whether to view information relating to 15-minute intervals or 1-day intervals.
15 Minute – Specifies statistics based on 15-minute intervals.
1 Day – Specifies statistics based on one-day intervals.
Slot (1-5) Specifies the slot number to display.
1-5 – Specifes that the 15 minute intervals will be displayed in chronological order with 1 being
the most recent.
1-2 – Specifies that the daily intervals will be displayed in chronological order with 1 being the
most recent.
Enter the appropriate information and click Find.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 11- 17 Historical Counter window
295