Dscp Map Settings - D-Link DGS-3700-12 User Manual

DSCP Map Settings

This window is used to enable DSCP Map Settings.
To view this window, click QoS > DSCP > DSCP Map Settings, as shown below:
The following parameters may be set:
Parameter Description
From Port /To Port A consecutive group of ports may be configured starting with the selected port.
DSCP Map Use the drop-down menu to choose a DSCP Map. Choose between DSCP Priority, DSCP
DSCP, and DSCP Color.
DSCP List (0-63)
This field allows the user to enter a DSCP value in the space provided, which will instruct the
Switch to examine the DiffServ Code part of each packet header. The user may choose a
value between 0 and 63.
Priority The switch will map the DSCP List to the Priority specified. When the DSCP Trust is enabled
per port.
Click Apply to implement changes.
HOL Blocking Prevention
This window is used to enable HOL Prevention Settings on the Switch.
To view this window, click QoS > HOL Blocking Prevention Settings, as shown below:
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 6- 9 DSCP Map Settings window
Figure 6- 10 HOL Blocking Prevention window
158