Dhcp Snooping Entry - D-Link DGS-3700-12 User Manual

DHCP Snooping Entry

This window is used to configure DHCP snooping entry settings.
To view this window, click Security > IP-MAC-Port Binding > DHCP Snooping > DHCP Snooping Entry, as shown
below:
The following fields can be set or modified:
Parameter
Port
Ports (e.g: 1, 7-12)
To find a DHCP snooping port, select the port or ports in the top half of the window and click Find. To clear the fields,
click Clear. To display all the DHCP snooping entries, click View All.
ND Snoop
The ND Snoop section includes ND Snoop Maximum Entry Settings and ND Snoop Entry.
ND Snoop Maximum Entry Settings
This window is used to configure ND snooping maximum entry settings.
To view this window, click Security > IP-MAC-Port Binding > ND Snoop > ND Snoop Maximum Entry Settings, as
shown below:
The following fields can be set or modified:
Parameter
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 8- 23 DHCP Snooping Entry window
Description
Use the drop-down menu to select a port.
Enter the desired ports or tick the All check box. Tick IPv4 or IPv6.
Figure 8- 24 ND Snoop Maximum Entry Settings window
Description
213