Vlan Precedence Settings - D-Link DGS-3700-12 User Manual

The following parameters can be configured:
Parameter
VLAN Name
VID
IPv4 Network
Address
IPv6 Network
Address
Priority
Enter the appropriate information and click Add to create a new entry. To search for a particular entry enter the
appropriate information and click Find. To remove an entry click Delete. To view all entries on the Switch, click Show
All. To remove all entries, click Delete All.

VLAN Precedence Settings

The VLAN precedence settings are used to configure VLAN classification precedence on each port. You can specify
the order of MAC-based VLAN classifications and subnet VLAN classifications. If a port's VLAN classificataion is a
MAC-based precedence, MAC-based VLAN classification will process first. If MAC-based VLAN classification fails, the
subnet VLAN classification will be executed. If a port's VLAN classification is subnet VLAN precedence, the subnet
VLAN classification will process first. If subnet VLAN classification fails, the MAC-based VLAN classification will be
executed.
To view this window, click L2 Features > VLAN > Subnet VLAN > VLAN Precedence Settings, as shown below:
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 16 Subnet VLAN Settings window
Description
The VLAN Name to be associated with the subnet.
The VLAN ID to be associated with the subnet.
Is used to specify an IPv4 network address. The format is ipaddress/prefix length. The prefix
length of the IPv4 network address cannot be greater than 64.
Is used to specify an IPv6 network address. The format is ipaddress/prefix length. The prefix
length of the IPv6 network address cannot be greater than 64.
The priority to be associated with the subnet. Its range is 0 to 7.
77