D-Link DGS-3700-12 User Manual page 72

The following fields can then be set in either the Add/Edit VLAN or Edit 802.1Q VLAN windows:
Parameter
VID
VLAN Name
Advertisement
Port Settings
Tagged
Untagged
Forbidden
Not Member
Click Apply to implement changes made.
To search for a VLAN click the Find VLAN tab at the top of the window. Next, enter a VLAN ID and click Find to
display the settings for a previously configured VLAN.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 7 802.1Q VLAN Settings window – Edit tab
Description
Allows the entry of a VLAN ID, or displays the VLAN ID of an existing VLAN in the Edit
window. VLANs can be identified by either the VID or the VLAN name.
Allows the entry of a name for a new VLAN, or modifying the VLAN name in the Edit window.
VLAN Name should be no more than 32 characters in length.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Allows an individual port to be specified as member of a VLAN.
Specifies the port as 802.1Q tagged. Checking the box will designate the port as tagged.
Specifies the port as 802.1Q untagged. Checking the box will designate the port as untagged.
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Allows an individual port to be specified as a non-VLAN member.
70