Dram & Flash Utilization - D-Link DGS-3700-12 User Manual

Show/Hide
DRAM & Flash Utilization
On this window the user can view information regarding DRAM and Flash utilization.
To view this window, click Monitoring > DRAM & Flash Utilization, as shown below:
Port Utilization
This window displays the percentage of the total available bandwidth being used on the port.
To view this window, click Monitoring > Utilization > Port Utilization, as shown below:
To select a port to view these statistics or, select the port by using the Port pull-down menu. The user may also use
the real-time graphic of the Switch at the top of the web page by simply clicking on a port.
Change the view parameters as follows:
Parameter
Port
Time Interval
Record Number
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Check whether or not to display Five Secs, One Min, and Five Mins.
Figure 11- 2 DRAM & Flash Utilization window
Figure 11- 3 Port Utilization window
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
283