Multicast Static Fdb Settings - D-Link DGS-3700-12 User Manual

Multicast Static FDB Settings

Users can set up multicast forwarding on the Switch.
To view this window, click L2 Features > FDB > Static FDB Settings > Multicast Static FDB Settings, as shown
below:
The fields that can be configured are described below:
Parameter
VID
Multicast MAC
Address
Port
Click Apply to implement changes made.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 38 Multicast Static FDB Settings window
Description
The VLAN ID of the VLAN the corresponding MAC address belongs to.
The static destination MAC address of the multicast packets. This must be a multicast MAC
address.
Allows the selection of ports that will be members of the static multicast group and ports that
are either forbidden from joining dynamically, or that can join the multicast group
dynamically, using GMRP. The options are:
None - No restrictions on the port dynamically joining the multicast group. When None is
chosen, the port will not be a member of the Static Multicast Group.
Egress - The port is a static member of the multicast group.
98