Ipv4 Limited Multicast Range Settings - D-Link DGS-3700-12 User Manual

The following fields can be set
Parameter Description
Profile ID (1-60)
Profile Name
To delete all the entries, click the Delete All button. To edit an entry, click the corresponding Edit button, as shown
below:
To configure the Group List Settings click the hyperlinked
Enter the multicast Address List, starting with the lowest in the range, and then click Add. To return to the IPv4
Multicast Profile Settings window, click the <<Back button.

IPv4 Limited Multicast Range Settings

This window enables the user to configure the ports or VLANs on the switch that will be involved in the Limited IPv4
Multicast Range. The user can configure the range of IPv4 multicast addresses that will be accepted on the ports or
VLANs.
To configure these settings, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Limited
Multicast Range Settings. The following window will open:
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 72 IPv4 Multicast Profile Settings window
Enter a Profile ID between 1 and 60.
Enter a name for the IPv4 Multicast Profile.
Figure 4- 73 IPv4 Multicast Profile Settings (Edit) window
Figure 4- 74 IP Multicast Address Group List Settings window
Group List.
121