Snmp View Table - D-Link xStack DGS-3400 Series Reference Manual

x Stack

SNMP View Table

This window is used to assign views to community strings that define which MIB objects can be accessed by a remote SNMP
manager.
To view this window, click Administration > SNMP Manager > SNMP View Table, as shown below.
To delete an existing SNMP View Table entry, click the corresponding
click the Add button which will reveal a new window.
The SNMP View created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous window.
The following parameters can be configured:
Parameter
View Name
Subtree OID
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 122 SNMP View Table window
Figure 2 - 123 SNMP View Table Configuration window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB
tree) that will be included or excluded from access by an SNMP manager.
button in the Delete column. To create a new entry,
108