MLD Router Port
Users can display which of the Switch's ports are currently configured as router ports in IPv6. A router port configured
by a user (using the console or Web-based management interfaces) is displayed as a static router port, designated by
S. A router port that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated
by F.
To view this window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Router Port, as shown
below:
Enter a VID (VLAN ID) in the field at the top of the window and click the Find button.
NOTE: The abbreviations used on this page are Static Router Port (S), Dynamic Router
Port (D) and Forbidden Router Port (F).
MLD Snooping Group
Users can view MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6 function comparable to IGMP
Snooping for IPv4.
To view this window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Group, as
shown below:
The following parameters may be viewed or modified:
Parameter
VLAN Name
VID List
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 59 MLD Router Port window
Figure 4- 60 MLD Snooping Group window
Description
TheVLAN Name of the multicast group.
The VID List of the multicast group.
114