D-Link DGS-3700-12 User Manual page 73

To create a VLAN Batch entry click the VLAN Batch Settings tab at the top of the window. The following window will
open:
Figure 4- 9 802.1Q VLAN Settings window – VLAN Batch Settings tab
The following fields can be set in the VLAN Batch Settings tab:
Parameter
VID List (e.g 2-5)
Advertisement
Port List (e.g. 1-5)
Tagged
Untagged
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 8 802.1Q VLAN Settings window – Find VLAN tab
Description
Enter a VLAN ID List that can be added, deleted or configured.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Allows an individual port list to be added or deleted as a member of the VLAN.
Specifies the port as 802.1Q tagged. Checking the box will designate the port as tagged.
Specifies the port as 802.1Q untagged. Checking the box will designate the port as untagged.
71