Time Zone Settings - D-Link DGS-3700-12 User Manual

Time Zone Settings

Users can configure time zones and Daylight Savings Time settings for SNTP.
To view this window, click Network Application > SNTP > Time Zone Settings, as shown below:
The fields that can be configured are described below:
Parameter
Daylight Saving Time
State
Daylight Saving Time
Offset In Minutes
Time Zone Offset
From GMT In +/-
HH:MM
DST Repeating
Settings
From: Which Week
Of The Month
From: Day Of Week
From: Month
From: Time In
HH:MM
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 9- 20 Time Zone Settings window
Description
Use this pull-down menu to enable or disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST
offset – 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean
Time (GMT.)
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires
that the DST beginning and ending date be specified using a formula. For example, specify
to begin DST on Saturday during the second week of April and end DST on Sunday during
the last week of October.
Enter the week of the month that DST will start.
Enter the day of the week that DST will start on.
Enter the month DST will start on.
Enter the time of day that DST will start on.
265