Mac Block List - D-Link DGS-3700-12 User Manual

MAC Block List

This window is used to view unauthorized devices that have been blocked by IP-MAC binding restrictions. To find an
unauthorized device that has been blocked by the IP-MAC binding restrictions, enter the VID and MAC Address in the
appropriate fields and click Find. To delete an entry, click the delete button next to the entry's port. To display all the
MAC blocked entries, click View All. To delete all the entries in the window, click Delete All.
To view this window, click Security > IP-MAC-Port Binding > MAC Block List, as shown below:
DHCP Snooping
The DHCP Snooping section includes DHCP Snooping Maximum Entry Settings and DHCP Snooping Entry.
DHCP Snooping Maximum Entry Settings
This window is used to configure DHCP snooping maximum entry settings.
To view this window, click Security > IP-MAC-Port Binding > DHCP Snooping > DHCP Snooping Maximum Entry
Settings, as shown below:
The following fields can be set or modified:
Parameter
From Port/To Port
Maximum Entry (1-
50)
Maximum IPv6
Entry (1-50)
Click Apply for implement changes.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 8- 21 MAC Block List window
Figure 8- 22 DHCP Snooping Maximum Entry Settings window
Description
Select the port or range of ports to configure.
Enter the maximum number of entries. The range is 1 to 50. Alternatively, tick the No Limit
check box.
Enter the maximum number of IPv6 entries. The range is 1 to 50. Alternatively, tick the No
Limit check box.
212