Management > Snmp > Snmp View Table Settings - D-Link DXS-1100 series User Manual

4 Configuration
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
Trap Sending: Enable or disable the sending of the SNMP notification traps that is generated by the system.
Trap State: Enable or disable the SNMP link change trap.
Click Apply to accept the changes made.
Management > SNMP > SNMP View Table Settings
This window is used to assign views to community strings that define which MIB objects can be accessed by
a remote SNMP manager. The SNMP Group created with this table maps SNMP users (identified in the
SNMP User Table) to the views created in the previous window.
The fields that can be configured are described below:
View Name: Enter an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.
Figure 4.47 – Management > SNMP > SNMP Linkchange Trap Settings
Figure 4.48 – Management > SNMP > SNMP View Table Settings
D-Link 10 Gigabit Ethernet Switch User Manual
4 1
4 1