Host-Based Network Access Control - D-Link DGS-3700-12 User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual

Host-Based Network Access Control

Figure 8- 8 Example of Typical Host-Based Configuration
In order to successfully make use of 802.1X in a shared media LAN segment, it would be necessary to create "logical"
Ports, one for each attached device that required access to the LAN. The Switch would regard the single physical Port
connecting it to the shared media segment as consisting of a number of distinct logical Ports, each logical Port being
independently controlled from the point of view of EAPOL exchanges and authorization state. The Switch learns each
attached devices' individual MAC addresses, and effectively creates a logical Port that the attached device can then
use to communicate with the LAN via the Switch.
802.1X Global Settings
This window is used to configure the 802.1X Global Settings on the Switch.
To view this window, click Security > 802.1X > 802.1X Global Settings as shown below:
Figure 8- 9 802.1X Global Settings window
200