Stp Instance Settings - D-Link DGS-3700-12 User Manual

STP Instance Settings

This table is used to create STP Instance Settings on the Switch. An STP instance may have multiple members with
the same MSTP configuration. There is no limit to the number of STP regions in a network but each region only
supports a maximum of 16 spanning tree instances (one unchangeable default entry). VIDs can belong to only one
spanning tree instance at a time.
To view this window, click L2 Features > Spanning Tree > STP Instance Settings, as shown below:
The following information can be set:
Parameter
MSTI ID
Priority
To modify an entry click the Edit button, to see the STP Instance Operational Status of a previously configured setting
click View, the following window will be displayed.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 31 STP Instance Settings window
Description
Displays the MSTI ID of the instance being modified. An entry of 0 in this field denotes the
CIST (default MSTI).
Enter the new priority in the Priority field. The user may set a priority value between 0 and
61440. The default is 32768.
Figure 4- 32 STP Instance Settings - View window
92