Snmp View Table Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Trap State
Click the Apply button to accept the changes made.

SNMP View Table Settings

This window is used to assign views to community strings that define which MIB objects can be accessed by a remote
SNMP manager. The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to
the views created in the previous window.
To view the following window, click Management > SNMP > SNMP View Table Settings, as shown below:
The fields that can be configured are described below:
Parameter
View Name
Subtree OID
View Type
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Description
that is generated by the system.
Select this option to enable or disable the SNMP link change trap.
Figure 4-9 SNMP View Table Settings Window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the
new SNMP view being created.
Type the Object Identifier (OID) sub-tree for the view. The OID identifies an object
tree (MIB tree) that will be included or excluded from access by an SNMP
manager.
Select the view type here. Options to choose from are Included, and Excluded.
• Included - Select to include this object in the list of objects that an SNMP
manager can access.
• Excluded - Select to exclude this object from the list of objects that an
SNMP manager can access.
34