System Log - D-Link DGS-3700-12 User Manual

(514 or 6000-65535)
Severity
Facility
Status
To add a new entry, enter the appropriate information and click Apply.

System Log

This window is used to view the Switch's history log, as compiled by the Switch's management agent.
To view this window, click System Configuration > System Log Configuration > System Log, as shown below:
The Switch can record event information in its own logs, to designated SNMP trap receiving stations, and to the PC
connected to the console manager. Click > to go to the next page of the System Log window. Click the Clear Log
button to clear the Switch History Log. Click the Clear Attack Log button to clear only the attack log entries without
clearing other log entries.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
This drop-down menu allows you to select the level of messages that will be sent. The options
are Emergency, Alert, Critical, Error, Warning, Notice, Informational, and Debug.
Some of the operating system daemons and processes have been assigned Facility values.
Processes and daemons that have not been explicitly assigned a Facility may use any of the
"local use" facilities or they may use the "user-level" Facility. Those Facilities that have been
designated are shown in the following: Bold font indicates the facility values that the Switch is
currently employing.
Numerical Facility Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by
syslog line printer subsystem
network news subsystem
7
UUCP subsystem
8
clock daemon
9
security/authorization messages
10
FTP daemon
11
Choose Enabled or Disabled to activate or deactivate.
Figure 2- 20 System Log display window
Numerical Facility Code
12
13
14
15
16
17
18
19
20
21
22
23
28
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)