Port Security Vlan Settings - D-Link DGS-3700-12 User Manual

Port Security VLAN Settings

This table is used to set the maximum port-security entries that can be learned on a specific VLAN.
To view this window, click Security > Port Security > Port Security VLAN Settings, as shown below:
The following parameters can be set:
Parameter
VLAN Name
VID List (e.g.:1,4-6)
Max Learning
Address
Click Apply to implement changes.
Port Security Entries
This window is used to configure port security entries by MAC address, port number and VLAN ID.
To view this window, click Security > Port Security > Port Security Entries, as shown below:
The following parameters can be set:
Parameter
VLAN Name
VID List (e.g.:1,4-6)
Port List
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 8- 37 Port Security VLAN Settings window
Description
Specifies a VLAN or list of VLANs by VLAN Name.
Specifies a VLAN or list of VLANs by VLAN ID.
Specifies the maximum number of port-security entries that can be learned by this VLAN. If
this parameter is set to 0, no user can get authorization on this VLAN.
If the setting is smaller than the number of current learned entries on the VLAN, the command
will be rejected. The default value is No Limit.
Figure 8- 38 Port Security Entries window
Description
Specifies a VLAN or list of VLANs by VLAN Name.
Specifies a VLAN or list of VLANs by VLAN ID.
Specifies a port or list of ports to be configured.
227