Table of Contents
Advertisement
D-Link DGS-1100-10/ME User Manual
Click Apply to create a new SNMP user account or click Delete to remove any existing data.
System > SNMP Settings > SNMP Group Table
This page is used to maintain the SNMP Group Table associating to the users in SNMP User Table.
SNMPv3 can control MIB access and security policies for a user group directly.
Group Name: Enter a SNMP user group name of up to 32 characters.
Read View Name: Enter a SNMP group name for users that are allowed SNMP read privileges to the
Switch's SNMP agent.
Write View Name: Enter a SNMP group name for users that are allowed SNMP write privileges to the
Switch's SNMP agent.
Security Model: Select the SNMP security model.
SNMPv1 - SNMPv1 does not support the security features.
SNMPv2 - SNMPv2 supports both centralized and distributed network management strategies. It
includes improvements in the Structure of Management Information (SMI) and adds some security
features.
SNMPv3 - SNMPv3 provides secure access to devices through a combination of authentication and
encrypting packets over the network.
Security Level: This function is only available when you select SNMPv3 security level.
NoAuthNoPriv - No authorization and no encryption for packets sent between the Switch and SNMP
manager.
AuthNoPriv - Authorization is required, but no encryption for packets sent between the Switch and
SNMP manager.
AuthPriv – Both authorization and encryption are required for packets sent between the Switch and
SNMP manger.
Notify View Name: Enter a SNMP group name for users that can receive SNMP trap messages generated
by the Switch's SNMP agent.
System > SNMP Settings > SNMP View Table
From this page you can maintain SNMP views to community strings that define the MIB objects which can be
accessed by a remote SNMP manager.
View Name: Enter a view name of up to 32 characters.
Figure 4.23– System > SNMP Settings > SNMP Group Table
Figure 4.24 – System > SNMP Settings > SNMP View Table
2
2
5
5
Hide quick links:
Advertisement
Table of Contents
