Show Sysdb Trace Verification Location - Cisco ASR 9000 Series Command Reference Manual

show sysdb trace verification location

show sysdb trace verification location
To display trace verification information for the system database (SYSDB), use the show sysdb trace
verification location command in EXEC mode.
show sysdb trace verification location node-id
Syntax Description
node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show sysdb trace verification shared-plane location command to display details of recent verification
sysDB transactions and changes on local plane configurations. The command output allows you to confirm
that configuration were verified and accepted.
Task ID
Task ID
sysmgr
cisco-support
Examples The following example shows the output of the show sysdb trace verification shared-plane location
command. The output shows that changes to the SysDB local plane were verified and accepted.
RP/0/RSP0/CPU0:router# show sysdb trace verification location 0/3/CPU0
Timestamp
323 wrapping entries (4096 possible, 299 filtered, 622 total)
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
26
Specific node. The node-id argument is entered in the rack/slot/module
notation.
jid tid
path
Modification
This command was introduced.
Operations
read
read
reg handle connid action
Troubleshooting Commands