Show Statsd Server Trace Command; Show Stats Lib Trace; Show Commands For The Statistics Infrastructure - Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual

Show Commands for the Statistics Infrastructure

show statsd server trace Command

Table 11-4
command. Each buffer can be displayed individually or in any combination. If no argument is specified,
all buffers are displayed for the statistics server on the local route processor (RP). To display information
for a particular location or all locations, use the location keyword.
Table 11-4
Buffer
error
collectors
contributors

show stats lib trace

This command can be used to see the events taking place in the Statistics library for collectors.
Table 11-5
be displayed individually or in any combination if required. If you do noy specify any arguments, further
it displays all buffers for all collectors on the local RP. To display information for a particular location
or all locations add location <foo|all>.
Table 11-5
Buffer
api
error
gsp
Show Commands for the Statistics Infrastructure
The output from all these commands are to be collected when any statistics issue is reported. These
sections provide information about the state of the statistics infrastructure:
•
•
•
•
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
11-218
lists the trace buffers that are included in the output from the show statsd server trace
Buffer Descriptions for the show statsd server trace Command
Description
Lists all unexpected events that have occurred in the statistics server. Events
are stored based on uniqueness so that at least one copy of each different error
message is retained even if the main buffer was wrapped.
Lists the registrations that have been made to convey the statistics server.
Lists the registrations that have been made for the statistics contribution.
lists the buffers that are included in the output of show stats lib trace command. These can
Buffer Descriptions for the show stats lib trace Command
Description
Lists all the API calls that have been made to the statistics library and their
results.
Lists all unexpected events that have occurred in the statistics server. The
error buffer has a unique component so that at least one copy of each different
error message is retained even if the main buffer was wrapped.
Lists all GSP activity between the stats library and stats manager .
show statsd manager info Command, page 11-219
show statsd collectors Command, page 11-220
show statsd registrations Command, page 11-222
show statsd requests Command, page 11-222
Chapter 11 Troubleshooting the Statistics Infrastructure
OL-21483-02