Related Manuals for Huawei OptiXstar B650G-8E8P3W
Summary of Contents for Huawei OptiXstar B650G-8E8P3W
- Page 1 OptiXstar B650G-8E8P3W Quick Start 01 Issue Date 2022-04-07 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: Table Of Contents
OptiXstar B650G-8E8P3W Quick Start 01 Contents Contents 1 Precautions..........................1 2 Product Appearance........................ 3 3 Installing the Device....................... 5 4 Connecting Cables.........................14 5 Description of Indicator....................... 15 6 Technical Specifications....................... 17 7 FAQs............................18 Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. -
Page 4: Precautions
Adopting these measures will help prevent device damage and bodily injuries which are especially prone during thunderstorms. ● Switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable, during periods of lightning activities. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. - Page 5 ● Near power lines - equipment or equipment, such as aging or aging cable plug board and other facilities, please timely replacement, to avoid the introduction of safety risk. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
-
Page 6: Product Appearance
2 Product Appearance Product Appearance NO TE If the appearance of the product in this document differs from the actual product, the actual product prevails. Ports and Description buttons Supports GPON uplink access. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. - Page 7 10 seconds to restore the factory settings. ● NOTE ● Restoring factory settings will clear user configuration data. Exercise caution when performing this operation. ● The key press duration varies depending on the device configuration. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
-
Page 8: Installing The Device
Mounting on the desktop NO TICE Do not stack the device when it is placed on the desktop. And make sure the device is properly grounded before powering on. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. - Page 9 ● Please make sure the device is properly grounded before powering on. Mounting in the 19 inch cabinet Mounting ears are required for mounting in the network box or cabinet, as shown in the following figure. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
- Page 10 1U apart and the front of the device should be at least 70mm. ● If you need good Wi-Fi performance, you need to reserve the height of the antenna when installing. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
- Page 11 ● The method for installing the ONU in a non-Huawei network box depends on the network box specifications. When the ONU is installed in a non-Huawei network box, the preceding heat dissipation space rules must be observed.
- Page 12 – Decouple the surge protector from the ONU power source using a power cable of 3–5 m. ● Guide for Grounding the Network Box of the TT Power Distribution System Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
- Page 13 As specified by the grounding standard, the cross-sectional area of the external ground cable must be greater than or equal to 16 mm ● Guide to Ground the Strength Member Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
- Page 14 Install the network box and ONU based on the instructions provided in this document. Grounding solution 1: The fiber strength member is isolated from the network box and grounded outside the network box. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
- Page 15 Then, use insulation tape to wrap the stripped optical cable. When wrapping the waterproof tape, ensure that fiber cores are force-free. iii. Cut excess fiber strength member for grounding. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
- Page 16 Otherwise, heavy currents may be discharged using the network ports on the local and peer devices, which may damage these network ports. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
-
Page 17: Connecting Cables
OptiXstar B650G-8E8P3W Quick Start 01 4 Connecting Cables Connecting Cables 1. Power socket 2. Optical port 3. USB 4. Desktop computer 5. STB 6. Telephone 7. Laptop computer Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. -
Page 18: Description Of Indicator
IP address is not obtained. Indicates that no network connection is configured. Steady Indicates that the VPN connection has been green established but no data is being transmitted. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. - Page 19 Green Indicates that the device is registered with the blinkin softswitch and data is being transmitted. Indicates that the device is not powered on or cannot be registered to the softswitch. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.
-
Page 20: Technical Specifications
Quick Start 01 6 Technical Specifications Technical Specifications Item Specifications Dimensions (WxDxH) 250 mm×170 mm×43.6 mm Weight about 1.4 kg Operating temperature -20°C to +55°C Operating humidity 5%RH to 95%RH (non-condensing) Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. -
Page 21: Faqs
As shown in the figure below, find WLAN, enter the new wireless network password on the 2.4G Basic Network Settings or 5G Basic Network Settings, and click Apply to update the password. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. - Page 22 Press RESET button with a needle for longer than 10 seconds to restore factory defaults and reset the B850G-8E8P3W3. If the indicator is off (except for the PWR indicator) and then is lit, the system restores successfully. Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd.