Series LTE CPE V100R001C00 User Guide Issue Date 2017-08-31 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
This chapter describes the functions, applications, product security and specifications of the product. 1.1 Product Introduction The Huawei eA380 Series CPEs are the Long Term Evolution (LTE) customer premises equipments (CPEs). As a wireless gateway, the eA380 can be deployed outdoors to provide services such as data collection and video surveillance.
Series LTE CPE User Guide 1Overview eA380-123 WLAN CH1-CH10 is unavailable when LTE works at band 40 1.4 Antenna Specifications Table 1-2 eA380s LTE antenna specifications Item eA380-123 eA380–135 Band 2300 to 2400 MHz (Band 40) 3400 to 3600 MHz (Band 42)
In normal cases, the USB port works in slave mode. In slave mode, the USB port will be mapped to a computer UI after the Huawei-provided chip driver is installed on the computer. This UI is locked by default. You can run other AT commands and write data to the SoftSim card only after running the unlock command.
1Overview To learn more about AT commands, Please contact Huawei. The chipset driver supporting the USB interface is the host driver that supports Huawei Balong V7R1. If you need it, contact Huawei. The maximum number of unlock the USB port attempts is five. After five attempt failures, users cannot input any key.
Step 3 Check whether the IP address is entered correctly. Step 4 If there is no problem after the above checks, try to restart the LTE CPE from the near end. Step 5 If the problem persists, please contact Huawei technical engineer. ----End 7.2 What Do I Do When Power Indicator Is Not Working?
Page 61
ISEDC RSS warning This device com plies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1)this device m ay not cause interference, and (2) this device must accept any inte rference, including interference that may cause undesired operation of the device.