Parameter Classification - YASKAWA JUSP-OP05A-1-E User Manual

2 Parameter/Monitor Modes

2.1.2 Parameter Classification

2.1.2

Parameter Classification

Parameters of the Σ -V Series SERVOPACK are classified into two types of parame-
ters. One type of parameters is required for setting up the basic conditions for opera-
tion and the other type is required for tuning parameters that are required to adjust
servomotor characteristics.
Classification
Setup Parameters
Tuning Parameters
2-6
Meaning
Parameters required
for setup.
Parameters for tun-
ing control gain and
other parameters.
Display Method
Always displayed
(Factory setting:
Pn00B.0 = 0)
Set Pn00B.0 to 1.
Setting Method
Set each parameter
individually.
There is no need to
set each parameter
individually.