YASKAWA JUSP-OP05A-1-E User Manual page 31

2 Parameter/Monitor Modes
2.2.1 Monitor Items
Parameter No
∗1.
2-8
Un015
Safety input/output signal monitor
Un020 Motor rated speed
Un021 Motor maximum speed
Linear scale pitch
Un084
(Scale pitch=Un084×10
Linear scale pitch index
Un085
(Scale pitch=Un084×10
The input signal monitor Un005 is displayed as follows. The upper portion indicates the
OFF status, the lower portion indicates the ON status. The undefined digits are displayed
in the lower portion (ON status).
U n 0 0 5 =
8 7 6 5 4 3 2 1 digit
Display
LED Input Terminal Name
Number
1 CN1-40 (can be allocated)
2
CN1-41 (can be allocated)
3 CN1-42 (can be allocated)
4 CN1-43 (can be allocated)
5 CN1-44 (can be allocated)
6 CN1-45 (can be allocated)
7 CN1-46 (can be allocated)
8
CN1-4 (cannot be allocated)
Content of Display
*3
Un085
[pm])
Un085
[pm])
/S-ON (Servo ON) input
/P-CON (Proportional operation refer-
ence) input
P-OT (Forward run prohibited) input
N-OT (Reverse run prohibited) input
/ALM-RST (Alarm reset) input
/P-CL (Forward current limit ON) input
/N-CL (Reverse current limit ON) input
SEN (SEN signal) input
Unit
min
min
Signal Name (Factory Setting)
−
-1
-1
−
−