YASKAWA JUSP-OP05A-1-E User Manual page 110

3 Utility Function Mode
3.2.29 One-parameter Tuning (Fn203)
Step Display after Operation
5
6
7
3-76
Keys
If the servomotor power is OFF, turn ON the
servo ON (/S-ON) signal. The display will
change from "BB" to "RUN."
If the servomotor power is ON, go to step 6.
Press the
Press the
LEVEL and FB LEVEL setting screens.
(cont'd)
Operation
Key to display the set value.
Key again to display FF