YASKAWA JUSP-OP05A-1-E User Manual page 52

3 Utility Function Mode
3.2.5 Initializing Parameter Settings (Fn005)
Step Display after Operation
3
4 Turn OFF the power and then turn it ON again to validate the new setting.
3-18
Keys
Press the
parameters.
During initialization, "Parameter Init"
is flashing in the display.
After the initialization is completed,
"Parameter Init" stops flashing and the
status display changes as follows:
"BB" to "DONE" to "BB."
Note: Press the
tialize parameters. The display
returns to the main menu of the
utility function mode.
(cont'd)
Operation
Key to initialize
Key not to ini-