Table of Contents
Advertisement
Step
Display after Operation
4
5
6
Keys
Press the
sure f" value will be displayed as the "Setting
f" value as well.
Example of measured waveform
If the vibration is not completely suppressed,
select the digit with the
and press the
tune the frequency "setting f." Skip this step
and go to step 7 if the fine-tuning of the fre-
quency is not necessary.
Note: If the setting frequency and actual
operating frequency are different, "Set-
ting" will flash.
Press the
change to usual display and the frequency cur-
rently displayed will be set for the vibration
suppression function
Example of measured waveform
3.2 Operations
(cont'd)
Operation
Key. The displayed "Mea-
Position
Error
Torque
reference
or
Key,
or
Key to fine-
Key. The "Setting f" will
.
Position
Error
Torque
reference
9 3
3-89
Hide quick links:
Advertisement
Table of Contents
