RIP Interfaces Dashboard
To display the following form, select Layer 3 > RIP > RIP Interfaces (click the underlined text, not the
folder).
The following table describes the RIP Interfaces Dashboard controls:
RIP Interfaces Dashboard controls
Table 45
Control
Search Range
Search Options
Interface ID
RIP State
RIP Version
Default Action
Supply Updates
Listen to Updates
Description
To search for a RIP interface, enter a range of interface ID numbers in the From and To fields.
To focus the search for a RIP interface, enter optional search parameters:
RIP version
RIP state
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for RIP interfaces specified in the search range that meet any of the criteria
entered.
and: Search for RIP interfaces specified in the search range that meet all of the criteria
entered.
Click Search to display RIP interface that fit the range and meet the criteria entered.
Displays each interface number.
Displays the current status of RIP in the interface: enabled or disabled.
Displays the RIP version used by the interface.
Displays the default action for RIP on the interface.
Displays the current status of Supply: enabled or disabled.
Displays whether Supply Updates is enabled or disabled.
Dashboard
69