Svp Server Configuration; Pn: 1725-36033-001_E.doc - Polycom SpectraLink 8000 SVP100 Administration Manual

SVP Server Configuration

PN: 1725-36033-001_E.doc

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
The screen is where you set the mode of the SVP
SVP-II Configuration
Server. It is also where you can lock the SVP Server for maintenance
and reset the SVP Server after maintenance. The type of gateway you
are using determines the mode of the SVP Server.
From the main menu, scroll to
pressing Enter.
Ensure the is set to
SVP-II Mode
The following options must be configured:
Phones per Access Point
AP specifications are detailed in the Configuration Notes for each brand
and type. Refer to these notes when entering the number of
simultaneous calls supported for your type.
802.11 Rate
Select 1MB/2MB to limit the transmission rate between the wireless
telephones and APs. Select
to determine its rate.
Configuring the SpectraLink 8000 SVP Server
and select by
SVP-II Configuration
as shown in the above screen.
NetLink IP
to allow the wireless telephone
Automatic
29