Programming The Controller; Setting The Current Date And Time - Hunter X-Core Owners Manual And Programming Instructions

ProGraMMInG THe ConTroller ...................................................................................

The display changes when
the dial is rotated to indicate
the specific programming
information to enter. When
programming, the flashing
portion of the display can be
changed by pressing the
or buttons. To change
Please leave with property owner
something that is not flashing,
press or until desired field
is flashing.
To activate a program in your
®
controller, you must enter the
following information:
1. Set current day and time – turn dial to SET CURRENT DATE/TIME.
2. Set what time of day you would like the program to start – turn dial to
SET PROGRAM START TIMES.
3. Set how long each valve will water – turn dial to SET STATION
RUN TIMES.
4. Set the day(s) you would like the program to water – turn dial to
SET DAYS TO WATER.
NOTE: All stations operate in numerical order. Only one
program start time is required to activate a watering
program.
16

Setting the Current Date and Time

1. Turn the dial to the SET
CURRENT DATE/TIME position.
2. The current year will be flashing
in the display. Use the and
buttons to change the year.
Push the button to proceed
to setting the month.
3. The month will be flashing. Use the
and buttons to change the month.
Press the button to proceed to
setting the day.
4. The day will be flashing. Use the
and buttons to change the day of the
month. Press the button to proceed
to setting the time.
5. The time will be displayed: Use the
and buttons to select AM, PM,
or 24 hr. Press the button to move
to hours. Use the and
change the hour shown on the display.
Press the button to move onto the
minutes. Use the and
to change the minutes shown in the
display.
The date, day, and time have now been set.
SET CURRENT DATE/TIME
buttons to
buttons