Hunter X-Core Owners Manual And Programming Instructions page 171

Alarm Log, "Reason" Labels
The Reason label indicates the type of alarm condition.
Unknown
Overflow
Underflow
Overcurrent
Activated
Deactivated
Damaged
Comm Fail
Unavailable
Comm Restore
Config Fail
Flow Totals
Flow Detail
Sensor Alarm
Lith Fail
Clock Fail
85
No reason specified
Overflow alarm occurred
Underflow alarm occurred
Station Overloaded
Sensor Activated
Sensor Deactivated
Decoder is damaged (continuous low
voltage output)
Decoder communications failure - no
response
Cannot run station due to too many
stations already running
Communications was restored to a
decoder
Failure occurred when attempting to
configure a sensor decoder on the
2-wire path
Failure occurred when attempting
to get the flow totals from a sensor
decoder
Failure occurred when attempting to
get the flow detail data from a sensor
decoder
The status of the Sensor Decoder
Alarm Polling has changed
The lithium battery in the facepack
has failed
A problem exists with the Real Time
Clock (RTC) in the facepack
COntrOller lOGS
Track significant events at the controller, which are not
necessarily alarms or malfunctions.
Message
EASY RETRIEVE
RESTORED
PROGRAM X RESET BY
CENTRAL
OFF MODE SET AT
CONTROLLER
RUN MODE SET AT
CONTROLLER
PROGRAMMABLE OFF SET
AT CONTROLLER
PAUSE MODE SET AT
CONTROLLER
PAUSE MODE CANCELLED
AT CONTROLLER
PROGAMMABLE OFF SET
BY CENTRAL
PAUSE MODE SET BY
CENTRAL
PAUSE MODE CANCELLED
BY CENTRAL
SUSPEND MODE SET BY
CENTRAL
SUSPEND MODE
CANCELLED BY CENTRAL
PROGRAMMABLE OFF
TIMEOUT
PAUSE TIMEOUT
NO WATER WINDOW
VIOLATION
MEMORY CORRUPTED
RESET TO DEFAULTS
ALL DATA RESET TO
DEFAULTS
ALL LOGS RESET AT
CONTROLLER
FLOW TOTALS RESET AT
CONTROLLER
ALL PROGRAM DATA
RESET AT CONTROLLER
ALL NAMES RESET AT
CONTROLLER
IRRIGATION STOPPED BY
CENTRAL
Description
Easy retrieve programs
were restored
Field controller Program X
was reset by central
Dial was put in OFF
position
Dial was taken out of OFF
position
Programmable Off was
initiated at the controller
Pause Mode was initiated
at the controller
Pause Mode was cancelled
at the controller
Programmable Off was
initiated by central
Pause Mode was initiated
by central
Pause Mode was cancelled
by central
Suspend Mode was
initiated by central
Suspend Mode was
cancelled by central
Programmable Off timed
out
Pause timed out
A No Water Window
Violation occurred
Memory is suspect and
was reset to defaults by
microcontroller
All data was reset in the
controller
All logs were reset at the
controller
All flow totals were reset at
the controller
All programs were reset at
the controller
All names were reset at the
controller
Irrigation was stopped by
the central