Hunter X-Core Owners Manual And Programming Instructions page 325

mounTing The TransmiTTer
standard mounting
Using the screws
provided with your
sensor, mount the
transmitter on any
surface where it
will be exposed
to unobstructed
rainfall, but not
in the path of
sprinkler spray. The
sensor should be
oriented upright
(as pictured), but the swivel bracket can be moved
for mounting on any angled surface. Loosen the
locknut and screw before swiveling the bracket, and
then re-tighten.
10
Standard Mount
gutter mounting (optional)
The sensor gutter
mount can be
purchased as an
optional accessory
for your Wireless
Rain-Clik (order
™
p/n SGM). The
SGM allows the
transmitter to be
mounted directly
to the edge of
a gutter. Install
the SGM on the transmitter by removing the
metal extension arm supplied with your sensor
and reinstalling the SGM. Position the gutter
mount on the edge of the gutter and twist the
thumbscrew to secure it in place.
SGM
Gutter Mount