Hunter X-Core Owners Manual And Programming Instructions page 172

Message
IRRIGATION STOPPED BY
MAINT RADIO
PAUSE MODE SET BY
MAINT RADIO
PAUSE MODE CANCELLED
BY MAINT RADIO
FCP MODE SET AT
CONTROLLER
EVENT MODE SET AT
CONTROLLER
FCP MODE SET BY
CENTRAL
EVENT MODE SET BY
CENTRAL
PROG OFF CANCELLED AT
CONTROLLER
CUST MAN PROGRAM X
RESET BY CENTRAL
ALL FCPs RESET BY
CENTRAL
ALL CUST PROGRAMS
RESET BY CENTRAL
ALL STATION DATA RESET
BY CENTRAL
ALL SSG DATA RESET BY
CENTRAL
ALL P/MV DATA RESET BY
CENTRAL
ALL SENSOR DATA RESET
BY CENTRAL
ALL FLOW SENSOR DATA
RESET BY CENTRAL
FLOW ACCUMULATORS
RESET BY CENTRAL
FLOW TOTALS RESET BY
CENTRAL
TIME OR DATE CHANGED
AT CONTROLLER
TIME OR DATE CHANGED
BY CENTRAL
86
Description
Irrigation was stopped by
maintenance radio
Pause Mode set by
Maintenance Radio
Pause Mode cancelled by
Maintenance Radio
FCP Mode set at controller
Event Mode set at
controller
FCP Mode set by central
Event Mode set by central
Programmable Off was
cancelled at controller
Custom Manual Program X
was reset by the central
All Field Controller
Programs (A to F) were
reset by central
All Customer Manual
Programs (1 to 4) were
reset by central
All station related data was
reset by central
All SSG related data was
reset by central
All Pump/Master Valve
data was reset by central
All Sensor 1 to 4 data was
reset by central
All Flow Sensor data was
reset by central
All Flow Accumulators
were reset by central
All Flow Totals were reset
by central
The time and/or date was
changed at the controller
The time and/or date was
changed by the central
StAtIOn lOGS
Station Log records all station activity in the controller.
The Mode labels are the same as shown in the Run dial
position, when stations are running.
Mode Meaning
AUTO Automatic Field Controller Program (FCP)
AUTOEV Automatic System Event
MAN Manual Station/Program
CUST Custom Manual Program
MAN-EV Manual System Event
MRP Maintenance Radio Program
MRS Maintenance Radio Station
ICR ICR Program/Station
ETS ET System Program/Station
LEARN Learn Mode
TEST Test Program
PAUSE Paused Program/Station
SUSP Suspended Program/Station
The Status portion shows the type of event, or the reason
a station did not complete. Each start and stop of a station
is recorded. If a station has a "Pause" or "Delayed" event,
it does not necessarily indicate a malfunction. There are
several causes that may occur during normal irrigation.
Status Description
System Pause Pause issued by controller or central
System Susp Suspend issued by central
Sensor Pause Pause initiated from sensor activation
Sensor Susp Suspend initiated from sensor
activation
No Water Win Station ran into no water window
Complete Station completed run time
Delayed Soak completed
Interrupted Indicates that a station was
interrupted by pause/suspend
Max Sta Run Station could not run since max
stations were already running
Overcurrent Station shut down due to overcurrent
Stopped Station was stopped due to dial put in
Off, Stop Irrigation command received
or higher priority event
Man Sta Chg Station stopped due to manual station
advance
Flow Pause Irrigation was delayed due to flow
isolation process
ADM Flt Susp Irrigation was suspended due to an
ADM fault
Dec Com Fail Irrigation was stopped due to a comm
failure with decoder