Hunter X-Core Owners Manual And Programming Instructions page 125

Alarm log items labeled "Missed Irrigation" are important,
because they have caused stations to not water when
they should. The reason for the missed irrigation will
always be indicated, as "Overcurrent" (electrical) or
"Overflow/Underflow" (hydraulic), etc. A complete list of
possible Alarm Log messages appears at the end of this
manual.
Each alarm log entry will have the exact time of the
occurrence of the missed irrigation event.
VIeW COntrOller lOGS
1. Turn the dial to the Data History position.
2. Press the down arrow button to select Controller Log.
3. Press the + button to view the log.
4. Use + and – buttons to scroll through the log of
Controller level events.
The Controller Log will store the last 250 Controller-level
events, with date and time stamp. These include critical
changes, such as dial turned to OFF position, Controller
time reset by user, Easy Retrieve Restore, and other
major changes. A complete list of possible Controller Log
messages appears at the end of this manual.
VIeW StAtIOn lOGS
1. Turn the dial to the Data History position.
2. Press the down arrow button to select Station Log.
3. Press the + button to view the log.
4. Use + and – buttons to scroll through the log of Station
level events.
39
The Station Log will store up to 1500 events, and records
all station activity, including every start and stop of each
station. It may include alarm events if applicable.
A complete list of possible Station Log messages appears
near the end of this manual.
All logs (Alarm, Controller, and Station) replace the oldest
events when they are full, and contain only the most recent
events within the controller memory's holding capacity.
They will never fill up, but the oldest records will be
overwritten (first in, first out, or FIFO).
All logs are cleared in computerized central systems
after the central computer uploads this data as part of its
communications. The log will then display NO RECORDS
TO SHOW and the logs will be available in the central
software, instead.
ADVAnCeD feAtureS
This dial position is used to verify the version and size of
the controller, and to configure and use some of the ACC
controller's more powerful features.
A list of functions will appear at the Advanced Features
dial position, but they will depend on the devices installed
in the controller, and the version of the controller.