Diagnostics; Read Current Function; Find Solenoid Function; Operating Stations - Hunter X-Core Owners Manual And Programming Instructions

DiAgNosTiCs

The DUAL decoder module has features and diagnostics to
help you troubleshoot installation issues and check the status of
solenoid operation. Basically, two functions are available to the
user in the Diagnostic mode:

read Current Function

Allows for real time current readings of solenoids operating on
the two-wire path.
1. Use the  buttons to select the "Read Current" function.
Press the  button once and the display will show the
current draw on the two-wire path.
2. The display will show current in milliamps (mA). The display
shows typical current draw for a single solenoid.
20

Find solenoid Function

The "Find Solenoid" function allows the users to activate
the solenoid of a single station in a mode the produces a
"chattering" sound. This function allows for quick identification
of valves on the site.
1. Use the  buttons to select the station you would like to
operate in the "Find Solenoid" mode.
2. Press the  button once to initiate. The module will
"chatter" the solenoid for 60 seconds. Use the  button at
any time to stop the "Find Solenoid" function.

operating stations

The I-CORE controller can operate two programs simultaneously
or up to five solenoids in the manual station operation model. At
any time the controller is operating stations, the station numbers
will be displayed.