Setting The Program Start Time(S); Eliminating A Program Start Time; Setting Station Run Times; Setting Days To Water - Hunter X-Core Owners Manual And Programming Instructions

proGrammING THE CoNTrollEr

setting the program start Time(s)

1. Turn the dial to the stARt tIMes position.
2. The factory preset is set on program
A. If necessary, you can select program
B, or C by pressing the
3. Use the or button to change
the start time. (The start times
advance in 15 minute increments).
4. Press the button to add an
additional start time, or
for the next program.
NoTE: One start time will activate all stations
sequentially in that program. this eliminates the
need to enter each station's start time. Multiple
start times in a program can be used for separate
morning, afternoon, or evening watering cycles.
start times may be entered in any order. the X-Core
will automatically sort them.

Eliminating a program start Time

With the dial set to stARt tIMes
position, push the or button until
you reach 12:00 AM (Midnight). From
here push the button once to reach
the OFF position.
18
button.
button

setting station run Times

1. Turn the dial to RUn tIMes position.
2. The display will show the last program
START TIMES
selected (A, B, or C), the station number
selected, icon, and the station will be
flashing. You can switch to another
program by pressing the
3. Use the or
station run time on the display. You can
set the run times from 0 to 4 hours.
4. Press the button to advance to the
next station.

setting Days To Water

1. Turn the dial to the WAteR DAys position.
2. The display will show the last program
selected (A, B, or C). You can switch to
another program by pressing the
3. The controller will display the seven days
of the week (MO, TU, WE, TH, FR, SA, SU).
Each day will have a icon or a
above the day. The icon would represent
an "On" water day, while a
START TIMES
represent an "Off" watering day.
button.
button to change the
button.
icon
icon would
RUN TIMES
WATER DAYS