Hunter X-Core Owners Manual And Programming Instructions page 318

feaTures
Wireless Rain-Clik
™
features include:
1. Quick Response
turns off the irrigation system immediately
rather than after it has accumulated a fixed
amount of rain. No calibration is required.
2. Maintenance-Free Design – Provides trouble-
free operation for up to ten years. There are
no batteries to replace.
3. Wireless operation up to 800 ft. (275 m) –
No wires are required between the rain sensor
and controller.
4. Two models available:
Wireless Rain-Clik
switch to deactivate automatic watering of
your irrigation controller when it rains. Once
rain has stopped and the sensor has dried out,
automatic irrigation will resume.
sensors attach quickly and easily to your controller. Wireless Rain-Clik
– Unique technology that
™
(WR-CLIK) – Acts as a
™
Wireless Rain/Freeze-Clik (WRF-CLIK) – The
Wireless Rain/Freeze-Clik includes a freeze
sensor that is designed to keep the irrigation
system from operating when temperatures
drop to 37˚F or below. When temperatures rise
above 37˚F, the sensor will enable automatic
watering.
5. Automatic Synchronization – The Wireless
Rain-Clik transmitter will send wireless
™
signals every hour to the receiver to assure
that the sensor and receiver are continuously
synchronized.
6. Lost Communication/Battery Status
Indication – The Sensor Bypass LED will flash
RED if the receiver has not received a signal
from the transmitter. This can indicate a low or
dead battery.
™
3