Hunter X-Core Owners Manual And Programming Instructions page 54

ProGraMMInG THe ConTroller (continued) ..............................................................
Run
After programming is complete, turn the dial to
RUN to enable automatic execution of all selected
programs and start times.
System Off
Valves currently watering will be shut off after the
dial is turned to the SYSTEM OFF position for two
seconds. All active programs are discon-
tinued and watering is stopped. To return
controller to normal automatic operation,
simply return dial to RUN position.
Manually Run a Single Station
1. Turn the dial to the MANUAL-
SINGLE STATION position.
2. Station run time will flash in the
display. Use the button to
move to the desired station.
You may then use the
and buttons to select the
amount of time for a station to water.
3. Turn the dial to the RUN position to run
the station (only the designated station
will water, then controller will return to
automatic mode with no change in the
previously set program).
NOTE: The manual single station function will
override the sensor.
18
RUN
SYSTEM OFF
MANUAL – SINGLE STATION
Seasonal Adjustment
Seasonal Adjust is used to make
global run time changes without
re-programming the entire
controller. This feature is perfect
for making small changes that are
necessary as the weather changes.
For instance, hotter times of the year may require a bit more water.
Seasonal adjust can be increased so that the stations will run longer
than the programmed time. Conversely, as Fall approaches, the seasonal
adjust can be reduced to allow for short watering durations.
1. Turn the dial to the SEASONAL ADJUSTMENT position.
2. Press the or buttons to set the percentage desired
from 5% to 300%
To view the new adjusted run time, turn the dial to set run time's position.
The displayed run times will be updated accordingly as the seasonal
adjustment is made.
NOTE: The controller should always be initially
programmed in the 100% position.
SEASONAL ADJUSTMENT