Hunter X-Core Owners Manual And Programming Instructions page 323

mounTing The reCeiver
Wiring the receiver to other Controllers:
normally Closed sensor applications
1. Attach the two yellow wires to the 24
VAC terminals.
2. Attach the blue and white wire to the sensor
terminals (if available) or in-line with the valve
common wire.
8
Red light indicates
SENSOR BYPASS
sensor is bypassed
C P MV
SENSOR STATUS GREEN = Sensor is dry
RED = Sensor is wet
Press to bypass, press
again to re-enable
RAIN SENSOR BYPASS
W
B
Y
Y
O
AC AC
Common Wire
to all Valves
Used for normally
open sensor
applications