Hunter X-Core Owners Manual And Programming Instructions page 53

ProGraMMInG THe ConTroller (continued) ..............................................................
Selecting Specific Days of the Week to Water
1. Press the button to activate a particular day of the week to water
(the display always starts with Monday). Press the
cancel watering for that day. After pressing a button the display auto-
matically advances to the next day. A icon indicates a water day.
A blank space indicates a no water day.
After programming, set dial to RUN to enable automatic execution of all
selected programs and start times.
Selecting Odd or Even Days to Water
This featureuses numbered day(s) of the month for watering instead of
specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days: 2nd,
4th, 6th, etc.)
1. With the cursor on SU press the
flash over ODD.
2. If is desired, turn the dial back to the run position.
3. If even day watering is desired, press the
will flash over EVEN. You can move back and forth from ODD to EVEN
by pressing the and buttons.
Odd Day Watering
button to
button once. The icon will
button once. The icon
Even Day Watering
Selecting Interval Watering
This feature is convenient if you want to
have a more consistent watering schedule
without having to worry about the day of
the week or the date. The interval you select
is the amount of days between watering
including the watering day.
1. Turn the dial to SET DAYS TO WATER
The water drop above Monday should
be flashing.
2. Press the button until the drop over
EVEN is flashing, then press the
button one more time. The display will
change to the interval mode and the
Interval Day number will be flashing.
3. Press the or button to select the
Interval Day(s) you desire.
4. Push the button once to advance to NO WATER DAYS to select
any days you do not want the Pro-C to water
(see page 20).
NOTE: If any days are selected as non-water days
at the bottom of the display, the Interval Day
watering will exclude those days. For example,
if the Interval Days are set at 5 and Monday is a
non-water day, the controller will water every 5th
day, but never on a Monday. If the interval water
day falls on a Monday and Monday is a non-water
day. The program would not water for 5 more days
resulting in no irrigation for 10 days total.
17