One Touch Manual Start And Advance - Hunter X-Core Owners Manual And Programming Instructions

ProGraMMInG THe ConTroller (continued) ..............................................................

One Touch Manual Start and Advance

You can also activate a program to water without using the dial.
1. Hold down the button for 2 seconds.
2. This feature automatically defaults to program
A. You can select program B, or C by pressing
the program.
3. The station number will be flashing. Press the
or button to scroll through the stations
RAIN SENSOR
and use the and buttons to adjust
BYPASS
the station run times. (If no buttons
ACTIVE
SYSTEM OFF
are pressed during step 2 or 3, the
controller will automatically begin
MANUAL – ALL STATIONS
program A.)
MANUAL – SINGLE STATION
4. Press the button to scroll to the
station you wish to begin with. After a 2 SET PUMP OPERATION
second pause, the program will begin.
This feature is great for a quick cycle when extra watering is needed or if
you would like to scroll through the stations to inspect your system.
20
RUN
Pro-C
®
SET CURRENT DATE / TIME
SET PROGRAM START TIMES
SET STATION RUN TIMES
SET DAYS TO WATER